三维地震技术在煤层顶板稳定性研究中的应用

龙固井田为全隐蔽的华北型煤田,位于巨野煤田中部,其首采扩大区主采煤层为3号煤层。考虑3煤层顶板稳定性主要受其顶板的构造信息和岩性信息影响,因此首先依据三维地震勘探综合解释成果及波阻抗反演解释成果对二者进行定量化,然后对波阻抗数据进行归一化处理,使得波阻抗数据和量化后的构造数据具有相同的变化范围及等量贡献。在此距离范围内构造和岩性的权值各为0．5,依此生成综合因素煤层顶板稳定性隶属度。分析3煤层顶板以上10m、20m处的综合因素煤层顶板稳定性隶属度图可以发现,该区3煤层顶板稳定性比较好。且其稳定性主要是受构造因素控制,岩性因素相对影响较小。     

地震勘探技术在深部找煤中的应用

成矿理论与勘探实践证明,东部一些老矿由于勘探深度、范围的限制以及认识上的局限,在矿区深部、周边仍有一些矿未能发现和查明,其中相当一部分仍具有找矿潜力;而寻找西部新的煤炭资源是国家“稳定东部发展西部”战略需要。针对中国东西部不同的地质条件和勘探目标,其地震勘探野外施工方法及资料处理原则有所差异;而资料解释在东部以查明地层赋存形态、煤层赋存范围、构造发育特征为主,西部则以寻找煤系地层波阻抗差异明显、连续性好的反射波组为解释重点。地震勘探技术在中国东西部的二个典型地震时间剖面佐证了其在深部找矿的应用效果。     

甘肃大泉水——白沙岘矿区含煤地层及煤层赋存特征

大泉水-白沙岘矿区位于甘肃省景泰县境内,在大地构造位置上处于北祁连加里东褶皱带东段,区内含煤地层为下石炭统靖远组和上石炭统羊虎沟组,属海陆交互相含煤沉积,根据岩性、岩相特征可划分为两个沉积旋回。该矿区主要可采煤层煤．层组赋存于羊虎沟组,厚1．71～9．00m,沿走向由西向东厚度变小,在大泉水井田可采厚度主要分布在V线以西,其东区段只是零星分布且不可采;在白沙岘井田煤层总厚度为2．99～5．15m,厚度变化小,属稳定煤层。煤：层组赋存于靖远组,仅分布在大泉水井田,厚1．33～8．88m,沿走向由西向东呈长透镜体状,西段和中段煤层发育较好．V线以东区段煤层变薄并出现无煤区。     

靖远矿区采煤沉陷区复垦综合评价方法研究

以靖远矿区为例,从土地复垦和恢复生态学的角度出发,建立了靖远矿区采煤沉陷区复垦综合评价系统,选择土壤条件（土层厚度、土壤质地、有机质含量、土壤水分）、地形改造条件（地面坡度、地表破坏程度、改造难易程度）、气候及水文条件（年降雨量、灌溉条件）作为分类及评价因子对复垦潜力进行评价。将采煤沉陷地分为四种潜力区,对每种潜力类型区的复垦开发利用方向进行了优化设计,从理论上和实践上对靖远矿区采煤沉陷地的复垦能力以及复垦过程中用地结构的优化作了探讨,以期对当地沉陷地的复垦提供一定的科学依据。     

Weak-contrast approximation of the elastic scattering matrix in anisotropic media

The plane-wave reflection and transmission coefficients at a plane interface between two anisotropic media constitute the elements of the elastic scattering matrix. For a 1-D anisotropic medium the eigenvector decomposition of the system matrix of the transformed elasto-dynamic equations is used to derive a general expression for the scattering matrix. Depending on the normalization of the eigenvectors, the expressions give scattering coefficients for amplitudes or for vertical energy flux.Computing the vertical slownesses and the corresponding polarizations, the eigenvector matrix and its inverse can be found. We give a simple formula for the inverse, regardless of the normalization of the eigenvectors. When the eigenvectors are normalized with respect to amplitudes of displacement (or velocity), the calculation of the scattering matrix for amplitudes is simplified.When the relative changes in all parameters are small, a weak-contrast approximation of the scattering matrix, based on the exactly determined polarization vectors in an average medium, is obtained. The same approximation is also derived directly from the transformed elasto-dynamic equations for a smooth vertically inhomogeneous medium, proving the consistency of the approximation.For monoclinic media, with the mirror symmetry plane parallel to the interface, the approximative scattering matrix is given in terms of analytic expressions for the non-normalized eigenvectors and vertical slownesses. For transversely isotropic media with a vertical axis of symmetry (VTI) and isotropic media, explicit solutions for the weak-contrast approximations of the scattering matrices have been obtained. The scattering matrix for amplitudes for isotropic media is well known. The scattering matrix for vertical energy flux may have applications in AVO analysis and inversion due to the reciprocity of the reflection coefficients for converted waves.Numerical examples for monoclinic and VTI media provide good agreement between the approximative and the exact reflection matrices. It is, however, expected that the approximations cannot be used when the symmetry properties of the two media are very different. This is because the approximation relies on a small relative contrast between the eigenvectors in the two media.Presented at the Workshop Meeting on Seismic Waves in Laterally Inhomogeneous Media, Castle of Trest, Czech Republic, May 22–27, 1995.     

Estimation of covariance matrix from geochemical data with observations below detection limits

Multivariate statistical analyses have been extensively applied to geochemical measurements to analyze and aid interpretation of the data. Estimation of the covariance matrix of multivariate observations is the first task in multivariate analysis. However, geochemical data for the rare elements, especially Ag, Au, and platinum-group elements, usually contain observations the below detection limits. In particular, Instrumental Neutron Activation Analysis (INAA) for the rare elements produces multilevel and possibly extremely high detection limits depending on the sample weight. Traditionally, in applying multivariate analysis to such incomplete data, the observations below detection limits are first substituted, for example, each observation below the detection limit is replaced by a certain percentage of that limit, and then the standard statistical computer packages or techniques are used to obtain the analysis of the data. If a number of samples with observations below detection limits is small, or the detection limits are relatively near zero, the results may be reasonable and most geological interpretations or conclusions are probably valid. In this paper, a new method is proposed to estimate the covariance matrix from a dataset containing observations below multilevel detection limits by using the marginal maximum likelihood estimation (MMLE) method. For each pair of variables, sayY andZ whose observations containing below detection limits, the proposed method consists of three steps: (i) for each variable separately obtaining the marginal MLE for the means and the variances, , , , and forY andZ: (ii) defining new variables by and and lettingA=C+D andB=C–D, and obtaining MLE for variances, and forA andB; (iii) estimating the correlation coefficient _YZ by and the covariance _YZ by . The procedure is illustrated by using a precious metal geochemical data set from the Fox River Sill, Manitoba, Canada.     

Probabilistic seismic hazard evaluation in underground mines

Stress concentrations produced by rock deformation due to extraction in underground mines induce seismicity that can take the shape of violent and quite dangerous rockbursts.The hazard evaluation presented in this paper is based on a Bayesian probabilistic synthesis of information determined from mining situations during excavation, with previous and present data from microseismicity and seismoacustics.The method proposed in this study is an example of time-dependent on-line seismic hazard evaluation. All results presented were obtained retrospectiely for different underground coal mines in Poland and Czechoslovakia.On leave from Institute of Geophysics, Polish Academy of Sciences 01-452 Warszawa, ul. Ksiecia Janusza 64, Poland.     

“煤特征指数”与矿井瓦斯危险类型的关系

矿井瓦斯危险程度与煤层中瓦斯赋存状况及其泄出方式有关,并取决于多种地质条件和采掘工艺。其中,煤特征条件特别重要。本文分析了湖南省的5种矿井瓦斯危险类型以及相应的煤特征条件,提出了“煤特征指数(I_c)”这一概念。I_c是一项评价矿井瓦斯危险程度的综合指标。研究表明,矿井瓦斯危险愈严重,则其I_c值愈高。应用该项成果预测了16对矿井的瓦斯危险类型,取得了满意的效果。     

使用价值分析优化方法在功能—技术矩阵求解中的应用

功能—技术矩阵,经众多工作者的努力研究,已渐趋成熟与实用。但如何利用功能—技术矩阵构造在广义现代设计领域中适用的科学模式,解决多学科设计方案的组成与评价问题,还存在薄弱环节。本文利用“使用价值分析优化”的概念,从设计方案技术先进性和经济合理性的协调统一的角度出发,较好地实现了功能—技术矩阵可行优化组合链的组成与评价,弥补了以往的缺陷。     

Acid leaching of ash and coal: Time dependence and trace element occurrences

The leaching of coal and coal/asphaltite/wood-ashes in sulfuric acid (pH 1.0, 25 °C, S/L, 1:10) was studied as a function of time; acid consumption and extracted metal concentrations are presented. Whole coals consumed acid rapidly during the first few minutes, followed by slow acid consumption. Wood-, lignite-, and asphaltite-ashes consumed acid in two stages, the rapid phase extending < 30 min and the slow phase extended up to 10 days. The rapid phase was dominated by the dissolution of Ca, K and Mg ions for wood-ash, by Ca, Al and Mg ions for lignite-ash and Ca and Mg ions for asphaltite-ash. The sulfur concentration in solution and the concentrations of Ca, Fe, K, Mg, Na, P, Al and Mn in the aqueous phase verified the neutralizing capacity of the untreated ashes as well as the formation of insoluble sulfates in the residues. The slow phase kinetics differed for different fuels and exhibited leaching of several abundant elements—Fe, Al, K, Na and Mn. Trace elements (Ba, Cd, Co, Cr, Cu, Mo, Ni, Pb, Th, U, V, Zn) sometimes required up to 32 h for maximal extraction from ashes. Suggestions are presented regarding the chemical nature of trace elements in the untreated coals and ashes and suitable residence times for economical industrial processes. We think it possible to combine bacteriological oxidation of sulfidic concentrates of acid leaching from ash of various qualities or even whole coals.